The invisible AC replacement

Replacing a home air conditioner is one of the largest purchases a Phoenix-area homeowner makes — typically $7,500 to $14,000 — and in a metro where summer means 110°F, thousands of households do it every year. So we went looking for it in the public record. We analyzed 8,063 building permits issued across the Valley in the last 12 months, plus the permit portals of all seven major jurisdictions. The replacement wave everyone in the Valley can feel turns out to be almost entirely invisible in public data.

A ComfortCost data study · Published November 20, 2026 · Data retrieved November 20, 2026 · Methodology and sources at the bottom of this page.

Finding 1: One in 3,204

The City of Mesa publishes the Valley's best permit data — a complete, daily-updated open dataset. Of the 3,204 residential permits Mesa issued between November 20, 2025 and November 18, 2026, 133 mention air conditioning at all, and almost all of those are new construction, remodels, or pools where HVAC is incidental. Requiring the permit to actually describe a replacement — "replace," "change out," "swap" — leaves four records. Exactly one is a standalone, like-for-like home AC replacement:

The only standalone residential AC replacement in a year of Mesa permits
DetailPermit record
PermitPMT26-17160, issued November 18, 2026
WorkReplace an existing ~2.5-ton split-system heat pump with a new Goodman 3-ton heat pump
Declared value$7,748

That declared value sits just below the low end of our published Mesa cost range for a 3-ton system ($8,300–$11,900) — close, and in the expected direction: declared permit values are applicant estimates that typically exclude some labor and fees, so they usually understate the final invoice. In other words, the single verifiable datapoint in a year of records is broadly consistent with the ranges in our cost calculator — and it is the only datapoint. The rest of the replacement market leaves no public price trail at all, which appears to be because like-for-like change-outs are issued through over-the-counter channels that the published building-permit datasets do not include.

Finding 2: The mechanical permits you can see aren't homes

Tempe is the only Valley city whose open data has a true mechanical permit class. It captured 39 mechanical permits in 12 months, with a median declared project cost of $100,000 — cooling-tower replacements ($475,000), rooftop units for commercial suites ($93,000), and similar work, concentrated in ZIP codes 85281, 85282, and 85283. Only 16 of Tempe's 2,934 permits in the period mention HVAC in their description at all. Anyone quoting an "average mechanical permit cost" to a homeowner is, knowingly or not, quoting commercial construction.

Finding 3: Two of seven cities publish data at all

Phoenix-area permit data transparency scorecard
JurisdictionDownloadable permit data?Cost/valuation data?
MesaYes — open data API, updated dailyYes
TempeYes — open data service, updated weeklyYes
PhoenixMap layer of current permits onlyNo
ScottsdaleNo — interactive reports and per-address searchNo
ChandlerNo — per-record lookup portalNo
GilbertNo — applicant portal onlyNo
Maricopa CountyNo — per-record lookup (unincorporated areas)No

For five of the seven jurisdictions, there is no way for a homeowner, journalist, or researcher to answer even a basic question — how many AC replacements were permitted last year, or at what declared values — without filing a public-records request and waiting.

Finding 4: What the data does show

Why this matters if you're replacing an AC

There is no public price list for the purchase you're about to make. No database will tell you what your neighbors paid, and the permit on your own install — which your contractor should absolutely pull — won't be published anywhere a future buyer can learn from. That information gap is exactly why quotes for the same job routinely differ by thousands of dollars, and why a defensible planning range matters before you sign. Our free calculator builds that range from system size, type, and efficiency; our city guides for Mesa, Tempe, Scottsdale, Chandler, and Gilbert add local rebate and permit notes. And when a contractor suggests skipping the permit to save a few hundred dollars, remember Finding 1: the permit is nearly the only trace your five-figure purchase will ever leave. Insist on it.

Methodology

ComfortCost analyzed building-permit records published by the City of Mesa (Building Permits dataset, Socrata open-data API; 156,898 records, of which 5,129 were issued November 20, 2025 – November 18, 2026) and the City of Tempe (Permits Issued by Building Safety, ArcGIS open-data service; 20,864 records, of which 2,934 were issued in the same window), retrieved November 20, 2026. We also reviewed the City of Phoenix Planning_Permit map layer (63,051 current permits) and the public permit portals of Scottsdale, Chandler, Gilbert, and Maricopa County. Residential records were identified using each city's own permit-type and record-type fields; HVAC-related work was identified by the Tempe mechanical permit class (BLDS class 995) and by keyword searches of free-text work descriptions (HVAC, A/C, air conditioning, heat pump, condenser, furnace, air handler) combined with replacement language. Declared valuations are the applicant-stated values recorded by each city (Mesa total_valuation; Tempe EstProjectCost); they are not final invoiced prices. Counts are permits issued, not completed jobs, and like-for-like residential equipment change-outs are known to be under-recorded in these datasets — a limitation that is itself one of this study's findings.

Sources

Journalists and researchers: you are welcome to cite these findings with a link to this page. Questions or data requests: [email protected].

Replacing your AC? Get free local quotes

Tell us about your project and local HVAC partners will contact you with itemized quotes. No obligation.

Prefer email? Write to us at [email protected].